|
|
| View Product |
|
|
|
- Monitors operator and work surface
Work surface monitoring may be disabled, providing user with more flexibility
- NEW
Mat ground connection for grounding and verifying resistance of mat to ground
- NEW
Dual status LEDs for operator monitoring
- Housing has tabs with holes, with screws and adhesive backed Velcro® strips provided
Optional mounting means unit is suitable to most any machinery or work, even in hard to reach locations
- Audible and LED visual alarms the instant a failure occurs
- Alerting user and supervisor of problem, allowing immediate corrective action
- Park snap feature
Provides means for operator to disconnect wrist strap cord when normally leaving work area without audible alarm sounding & provides means of wrist cord storage
- Wave Distortion Technology provides real-time monitoring
Pays for itself - ensures ESD protected workstation, reducing catastrophic failures and latent defects
- Utilizes reliable wave distortion technology
Provides true 100% continuous monitoring, not pulsed current that's off over 90% of time
Can use with any brand of single-wire wrist strap and cord components
- Life-cycle costs of monitor/wrist strap/cord are 66% lower than dual-wire approach
- Miniscule electrical current required to generate waveform
- No reported case of skin irritation
Designed for use by 5 foot tall 90 pound to 6 foot 5 inch 250 pound person
- Individual adjustment for each operator is not necessary
Provided with calibration to NIST traceable standards
- Important for users to maintain NIST calibration at their facility
- Calibration unit available (Item 94385)
- Simple and quick means to assure accurate performance and conform with ANSI/ESD S20.20 Paragragh 6.2.2.2. Provides lower calibration life cycle costs
- Made in America
- Note: Work surface must have a conductive layer such as Dual Layer Rubber or Dissipative 3-Layer Vinyl or Micastat® Dissipative Laminate with conductive buried layers. Our Continuous Monitors are not recommended for use with homogeneous matting.
- Note: Continuous Monitors pay for themselves improving quality, productivity, eliminating wrist strap daily testing and test result logging. Per ESD-S1.1 paragraph 6.1.3 Frequency of Functional Testing "The wrist strap system should be tested daily to ensure proper electrical value. Daily testing may be omitted if constant monitoring is used."
- Note: Work surface must have a conductive layer such as Dual Layer Rubber or Dissipative 3 Layer Vinyl or NVMT Dissipative Laminate with conductive buried layers. SPI Continuous Monitors are not recommended for use with homogeneous matting.
Click on the Product No(s). below to view further information and order now!
|
| Part No. |
Description |
Price 1 - 4 |
Price 5+ |
|
94338
|
Monitor w/ 120V Auto-Jack
|
|
|
|
94339
|
Monitor w/ 220V Auto Jack
|
|
|
|
|
|
|
|
|
