 |
|
"V" GROOVED WHEEL CASTERS
Ideal for production systems which operate constantly from station to station... allows better use of floor space and avoids cluttered aisles. Nut and bolt axles. Roller bearing. Zinc plated. FOB Ship...
|
| |
 |
|
ADJUSTABLE HEIGHT FLOOR LOCK
Uniform locking keeps the unit working properly as spring and pads wear out over time. Features a bright zinc plated finish with heavy-duty cast steel construction. Bottom pad includes suction cups fo...
|
| |
 |
|
ECONOMY LIGHT MEDIUM CASTER
Features 2 ball bearing swivel raceways and ball bearings in wheels also. Made of cold rolled steel and embossed for added strength - handles loads from 100 - 1000 lbs. Complete with protective plasti...
|
| |
 |
|
EXTRA HEAVY-DUTY CASTERS
Features precision tapered thrust bearing with dust seal in lower raceway. Replaceable bolt axles and hardened steel bushings. Bearing seal keeps dirt out, while greasing purges old lube. Green epoxy ...
|
| |
 |
|
FLOOR LOCKS
Large steel disc features non-marking rubber pad for non-slip floor contact. Top plate is 3-3/4"W x 4-5/8"L with bolt hole 2-5/8"W x 3-5/8"L, slotted to 3 x 3". Sturdy steel construction. Electro-plat...
|
| |
 |
|
FLOOR LOCKS
An easy, low cost method of preventing caster equipment from accidently rolling away from its desired position....
|
| |
 |
|
GENERAL-DUTY CASTER
Wheel Description PAYVULC - Mold on rubber, cast iron center. PLEXITE - Phenolic, macerated canvas backing. MIRATEK - Polyurethane, 9...
|
| |
 |
|
HEAVIER-DUTY CASTER
Features 1/2" top plate, 1" king bolt and axle. Embossed 3/8" legs welded to yoke base. Top plate measures 5-1/2"W x 7-1/2"L, bolt hole is 3-3/8" x 5-1/4", slotted to 4-1/8" x 6-1/8". Roller bearing. ...
|
| |
 |
|
HEAVY DUTY CASTERS
Heavy duty casters feature welded heavy plate metal brackets for a capacity of up to 950 lbs. Typically used for material circulation conveying devices with a maximum load of 880 lbs. per...
|
| |
 |
|
HEAVY-DUTY CASTER
Top plate is 5/16" cold forged. Top plate measures 4-3/4" x 6-5/8", bolt hole is 2-7/16" x 4-15/16", slotted to 3-3/8" x 5-1/4". Features precise double ball bearings. 3/4" Kingpin. Roller bearing. Zi...
|
| |
 |
|
HEAVY-DUTY CASTERS
One-piece combination lower ball race and king pin improves structure rigidity and easier swiveling. 3/4" king pin is orbital cold formed for superior strength and stability. Swivel casters feature gr...
|
| |
 |
|
HEAVY-DUTY DUAL-WHEEL CASTER
Zinc plated. Choose from three series for the appropriate load required. FOB Shipping Point.
Wheel Description
A) PAYVULC - Mold on rubber, cast iron center.
B) PLEXITE
|
| |
 |
|
HI-CAP RUBBER MOLD-ON / CAST IRON WHEELS
Features long service with true abrasion resistance. Made of 90 Durometer hard rubber tread. They start easier with heavy loads with less effort to keep them rolling, while the harder tread ...
|
| |
 |
|
LIGHT DUTY SWIVEL & RIGID CASTERS
Top plate is 3-1/8" x 4" with mounting holes at 1-3/4" x 3"slotted to 2-3/8" x 3-3/16" for use with 5/16" bolts. Total Stop brake rocker pedal braking system available for swivel casters only. FOB ...
|
| |
 |
|
LIGHT DUTY TOP PLATE CASTERS
Top plate is 3-1/8" x 4" with mounting holes at 1-3/4" x 3" slotted to 2-3/8" x 3-3/16" for use with 5/16" bolts. Rocker pedal braking system with wheel/swivel lock available -- add TS to product no. ...
|
| |
| |
